Updated Nov 20, 2026· 8 min read

Key takeaways

  • Find the best generator interlock kit for your panel. Compare Siemens, Square D, Eaton, and GE fits, spacing, and safety rules before you buy.

When the power fails, a portable generator can keep the lights, fridge, and furnace running, but only if its power reaches the house wiring safely. A generator interlock kit is the small plate that makes that connection legal: it bolts onto the front of the main breaker panel and slides between the main breaker and a generator breaker, so only one can be on at a time. That rule stops generator power from flowing back into the utility lines, where it can injure line workers.

An interlock kit is not the same product as a transfer switch kit. The transfer switch kits in our earlier guide are complete boxes with their own switch panel, an outdoor inlet box, and a cord, and they power only the circuits wired into the switch. An interlock kit uses the panel you already own, so it can feed any circuit in the house at a lower parts cost. The trade is that the plate alone is not a complete setup: you still need a generator breaker, a power inlet box, and a cord, and a licensed electrician should install it with a permit.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For homes, the Siemens ECSBPK01 is the best choice: it is the panel maker’s UL Listed kit for Siemens and Murray panels, and it fits the most common main breaker layout. Homeline owners should pick the Square D HOMCGK2C, Eaton owners the EXCELFU GK-PN200, and GE owners the Flngr GE-200HDA. Match the kit to your panel brand first, then measure the spacing between the main and generator breakers.

The 5 Best Generator Interlock Kits

1. Siemens ECSBPK01 Generator Standby Power Mechanical Interlock

Siemens makes this kit for its own load centers: it is UL Listed for Siemens or Murray panels where the main breaker is a two-pole QP breaker opposite the standby breaker. The plate slides to block one breaker whenever the other is on, so backfeed is impossible while it is in place. Breakers are not included, so the electrician adds a QP or MP two-pole breaker for the generator feed, usually 30 amps for a mid-size portable or 50 amps for a larger one.

This is the pick for homes with a Siemens or Murray panel and a main breaker across from the generator breaker position, and for owners who want the panel maker’s own part. It does not fit panels where the main and generator breakers sit side by side, or 150 to 225 amp Ultimate or Rock Solid panels, which use the ECSBPK03 instead. Check the plate and hardware on arrival, since the one-year warranty is short.

Spec Detail
Fits Siemens or Murray panels, 2-pole QP main opposite standby breaker
Main breaker 2-pole QP, 15-125 amp
Standby breaker QP or MP type
Listing UL Listed
Warranty 1 year parts

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

2. Square D HOMCGK2C Homeline Generator Interlock Kit

Square D’s own kit for Homeline load centers covers indoor panels from 150 to 225 amps, with QOM1 or QOM2 frame mains. Like the Siemens kit, it is a panel-maker part, so an inspector is likely to accept it without argument. The plate mounts on the panel cover and interlocks the main breaker with a two-pole Homeline breaker fed from the generator, so the owner can power any circuit by switching breakers by hand. The generator breaker is not included, so the electrician adds a HOM230 for a 30-amp feed or a HOM250 for a 50-amp feed, plus a hold-down.

This is the pick for Homeline owners who want the official Square D part. It suits indoor panels only, and it does not fit 60-space Homeline panels, which have no listed Square D kit, or QO panels, which use a different kit. Confirm the main breaker frame size before ordering, since QOM1 and QOM2 breakers differ.

Spec Detail
Fits Homeline 150-225 amp indoor load centers
Main breaker QOM1 or QOM2 frame
Breakers Not included

3. QYZZRS DDA-01 Generator Interlock Kit

The QYZZRS DDA-01 is a third-party stainless steel plate for Square D QO or Homeline panels rated 150 or 200 amps, and it is the budget pick for Square D owners. The fit depends on one measurement: the gap between the main breaker and the generator breaker position must be 1-3/8 inches. The kit ships with a drill bit, shoulder screws, hex nuts, and labels, plus an installation video that helps installers place the two cover holes correctly.

This is the pick for Square D owners on a budget, and for damp basements and garages, where stainless steel resists corrosion. It suits owners comfortable drilling precise holes in the cover. It carries no UL listing claim, so some inspectors may prefer the Square D kit instead, and it does not fit panels where the spacing differs from 1-3/8 inches. Measure the gap before ordering.

Spec Detail
Fits Square D QO or Homeline, 150 or 200 amp
Spacing 1-3/8 in between main and generator breaker
Material Stainless steel
Included Drill bit, labels, shoulder screws, hex nuts

4. EXCELFU GK-PN200 Generator Interlock Kit

The EXCELFU GK-PN200 is built for Eaton Cutler-Hammer BR series panels, and it also fits BR plug-on neutral and CH plug-on neutral panels, all at 150 or 200 amps. Its spacing window is wider than most kits in this guide, from 1-1/4 to 1-7/16 inches between the main and branch breakers, which makes it forgiving when the exact panel model is hard to confirm. The kit includes the plate, shoulder screws, hex nuts, a drill bit, labels, and zip ties, and the maker rates it for 24,000 watts, which covers large portable generators.

This is the pick for Eaton owners, and for homes where the panel label is worn or the model number is unclear. It does not fit Siemens, Square D, or GE panels, and the printed instructions are sparse, so plan on a panel-specific walkthrough alongside the paperwork. The generator breaker is not included.

Spec Detail
Fits Eaton BR and CH series, 150 or 200 amp
Spacing 1-1/4 to 1-7/16 in
Current rating 200 amp
Model GK-PN200

5. Flngr GE-200HDA Generator Interlock Kit

GE panels use a vertical main breaker, a layout most plates ignore, and the Flngr GE-200HDA is shaped around it. The kit fits GE panels with a 150 or 200 amp vertical main breaker, with a 2-1/4 inch gap between the main and branch breakers. The box includes the interlocking panel, a matching drill bit, shoulder screws, hex nuts, reminder labels, fixing straps, and instructions, so the electrician has the full hardware set in one box.

This is the pick for GE owners, and one of the few off-the-shelf options for the vertical-main layout. It does not fit GE panels with a horizontal main, or other brands at all. Because GE sold its panel line to ABB, the label may carry either name, so confirm the catalog number inside the panel door.

Spec Detail
Fits GE vertical main, 150 or 200 amp
Spacing 2-1/4 in between main and branch breakers
Model GE-200HDA
Included Drill bit, shoulder screws, hex nuts, labels, straps

How to Choose a Generator Interlock Kit

Open the panel door with the main breaker off and read the label inside for the brand and catalog number, then read the type printed on the main breaker itself. That pair narrows the choice to one or two kits. Then measure the gap between the main breaker and the spot for the generator breaker, because every kit here is built for one spacing.

Decide between the panel maker’s own kit and a third-party plate. The panel maker’s kit is the safest choice at inspection, while third-party plates cost less and often include the drill bit and labels. Either way, budget for the parts the plate does not include: a two-pole generator breaker with a hold-down retainer, a power inlet box, and a generator cord rated for the inlet amperage. A licensed electrician should do the install, and most areas need a permit.

Size the generator breaker to the generator, not to the panel. A 30-amp breaker suits most portables with a locking 30-amp outlet, while a 50-amp breaker suits larger portables with a 50-amp outlet. The plate does not manage loads: once the generator is running, the owner switches off non-essential breakers by hand to stay inside its output.

Who Should Skip It

Skip an interlock kit if your panel has no listed kit for its brand and model. Some older panels and meter-main combinations have no matching plate, and forcing the wrong plate onto the cover is a safety hazard. A transfer switch kit or panel upgrade is the safer route.

Skip it if your local inspector does not accept interlocks. A few jurisdictions reject them outright, and a few require the panel maker’s own kit. Ask the inspector before buying anything.

Skip it if you want automatic backup. An interlock kit is manual: someone must be home to switch the main breaker off, switch the generator breaker on, and manage the loads. Homes that need power while empty should look at a standby generator with an automatic transfer switch instead.

FAQ

Do I need a permit to install a generator interlock kit?

In most areas, yes. The install touches the main panel, so it usually needs a permit and an inspection by a licensed electrician. Check with the local building department first, since a few jurisdictions do not accept interlocks.

Can one interlock kit fit any panel?

No. Every kit is built for one panel brand and one breaker layout, and the spacing between the main and generator breakers must match. Read the brand and catalog number inside the panel door, then measure the gap.

What else do I need besides the interlock plate?

A two-pole generator breaker with a hold-down retainer, a power inlet box mounted outside, and a generator cord rated for the inlet amperage. The plate alone does not connect the generator to the house, and the breaker, inlet box, and cord are bought separately.

Is an interlock kit as safe as a transfer switch?

When the kit is listed for the panel and installed correctly, it meets the same core safety rule: the main breaker and the generator breaker can never be on together, so generator power cannot flow back into the utility lines. A transfer switch adds convenience by pre-selecting circuits, while an interlock kit lets the owner choose any circuit by hand.

Final Verdict

The Siemens ECSBPK01 is the best all-around pick for Siemens and Murray panels, because it is the panel maker’s own UL Listed kit. The Square D HOMCGK2C is the best pick for Homeline panels, the EXCELFU GK-PN200 for Eaton BR and CH panels, and the Flngr GE-200HDA for GE vertical-main panels. Match the kit to the panel first, measure the spacing second, and have a licensed electrician install it.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Generator Interlock Kits for Safe Home Backup…Check price on Amazon