Key takeaways
- Compare five standby generators for whole-home backup, with automatic transfer switches, natural gas and propane fuel, sizing guidance, and install notes.
A standby generator sits outside the home, wired into the main panel through an automatic transfer switch. When utility power drops, it senses the loss, fires up on its own, and carries the circuits it feeds until grid power returns. No extension cords, no refueling in the dark.
Every unit in this guide is a fixed, permanently installed model that runs on natural gas or liquid propane from a piped supply or a dedicated tank. That is the key difference from the portables in the site’s earlier home-backup guide: portables roll out when needed, while a standby unit lives in place and takes over by itself. A load calculation sizes the unit to the home before licensed installers fit it.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most homes, the Generac Guardian 22kW with a 200-amp switch (7043) is the strongest all-around pick, with enough output for central air plus everyday circuits. Smaller homes that only need essentials can save on size and fuel with the Generac Guardian 10kW (7172). The Kohler 14kW and Generac 18kW sit in the middle, and the Kohler 26kW suits large homes with heavy simultaneous loads.
1. Generac Guardian 22kW with 200-Amp Transfer Switch (7043)
The 7043 is the largest air-cooled Guardian here, for homes where central air, a well pump, and everyday circuits all need to run at once. It delivers 22,000 watts on propane and 19,500 watts on natural gas, and the included 200-amp service-entrance-rated switch moves the whole panel over. WiFi Mobile Link monitoring reports status and alerts to a phone.
It needs a concrete pad, a gas line, and permits arranged by the installer. The trade-off is fuel draw at full load: homes with modest loads will pay for capacity they never use. Confirm the gas meter can feed it at full load, and confirm the exact bundle before ordering, since Generac sells the same 22kW generator alone under model 7042, without the switch.
| Feature | Detail |
|---|---|
| Type | Fixed standby generator |
| Output | 22 kW on propane, 19.5 kW on natural gas |
| Transfer switch | 200 amp, service-entrance rated, included |
| Fuel | Natural gas or liquid propane |
| Engine | Generac G-Force |
| Monitoring | WiFi Mobile Link |
| Warranty | 5-year limited |
| Dimensions | 48 x 25 x 29 in |
| Weight | not stated |
2. Generac 18kW NextGen with 200-Amp Transfer Switch (7324)
The 7324 is the middle-ground pick in the Generac NextGen line, rated at 18,000 watts on propane and 17,000 watts on natural gas. It bundles a 200-amp service-entrance-rated smart transfer switch with the generator, so the installer wires one package rather than matching parts from separate boxes. Monitoring runs over cellular, WiFi, and Bluetooth through Mobile Link, which matters when home internet is down during an outage.
The G-Force 800 engine displaces 817cc, the cabinet measures 46.4 by 26.3 by 30.7 inches, and the unit weighs 426 lb. The battery is sold separately, so confirm it is on the order before install day. One honest limit: homes that want a 3-ton central air conditioner running alongside other loads should step up to the 22kW model.
| Feature | Detail |
|---|---|
| Type | Fixed standby generator |
| Output | 18 kW on propane, 17 kW on natural gas |
| Transfer switch | 200 amp, service-entrance rated, included |
| Fuel | Natural gas or liquid propane |
| Engine | Generac G-Force 800, 817cc |
| Monitoring | Cellular, WiFi, and Bluetooth Mobile Link |
| Controller | Power Zone 200 |
| Warranty | 5-year limited |
| Dimensions | 46.4 x 26.3 x 30.7 in |
| Weight | 426 lb |
| Battery | Sold separately |
3. Kohler 14kW with 200-Amp Transfer Switch (14RCAL-200SELS)
Kohler’s 14kW unit is the quietest-sounding pick in this guide during its weekly exercise, rated at 63 dB(A) while exercising and 69 dB(A) at full-speed operation. It delivers 14,000 watts on propane and 12,000 watts on natural gas, and the included 200-amp RXT automatic transfer switch carries the whole panel. The Kohler CH740 V-twin engine displaces 725cc, and OnCue Plus remote monitoring reports status to a phone.
Size this unit on the 12kW natural-gas figure, the lower number and the one that decides what stays on. Kohler backs it with a 5-year, 2000-hour limited warranty. The main weakness is stock visibility: the Amazon listing showed no featured offers in the most recent crawl, while dealer listings showed the package in stock, so confirm availability with the seller first.
| Feature | Detail |
|---|---|
| Type | Fixed standby generator |
| Output | 14 kW on propane, 12 kW on natural gas |
| Transfer switch | 200 amp RXT automatic, included |
| Fuel | Natural gas or liquid propane |
| Engine | Kohler CH740 V-twin, 725cc |
| Monitoring | OnCue Plus |
| Sound | 63 dB(A) exercise, 69 dB(A) full operation |
| Warranty | 5-year, 2000-hour limited |
| Dimensions | not stated |
| Weight | not stated |
4. Generac Guardian 10kW with 100-Amp Transfer Switch (7172)
The 7172 is the smallest unit in this guide and the right size for essentials-only backup: refrigerator, freezer, sump pump, furnace fan, lights, and a home office. It delivers 10,000 watts on propane and 9,000 watts on natural gas, and the included 100-amp, 16-circuit transfer switch means the installer picks which circuits get power rather than backing up the whole panel. That is a good fit for smaller homes.
The G-Force 400 engine displaces 460cc, the cabinet measures 48 by 25 by 29 inches, and the unit weighs 338 lb. WiFi Mobile Link monitoring is included, and the aluminum enclosure is built for outdoor installation. The 5-year limited warranty matches the rest of the Guardian line.
| Feature | Detail |
|---|---|
| Type | Fixed standby generator |
| Output | 10 kW on propane, 9 kW on natural gas |
| Transfer switch | 100 amp, 16-circuit, included |
| Fuel | Natural gas or liquid propane |
| Engine | Generac G-Force 400, 460cc |
| Monitoring | WiFi Mobile Link |
| Warranty | 5-year limited |
| Dimensions | 48 x 25 x 29 in |
| Weight | 338 lb |
5. Kohler 26kW with 200-Amp Transfer Switch (26RCAL-200SELS)
The 26RCAL is the capacity leader in this guide, rated at 26,000 watts on propane and 24,000 watts on natural gas, with 39 kVA of motor-starting capacity at 240 volts. It suits large homes with multiple air conditioners, well pumps, and electric water heating. The included 200-amp RXT automatic transfer switch carries the whole panel. The Kohler Command Pro V-twin engine displaces 999cc.
At 670 lb it needs a proper pad, a gas supply sized for full-load draw, and a licensed crew for the install. Extra capacity adds cost, not comfort, if the home’s loads are modest, so this unit only makes sense after a load calculation shows the smaller sizes falling short. Stock visibility is the weakest in this guide: the Amazon listing showed third-party buying options only in the most recent check, so confirm the seller before ordering.
| Feature | Detail |
|---|---|
| Type | Fixed standby generator |
| Output | 26 kW on propane, 24 kW on natural gas |
| Transfer switch | 200 amp RXT automatic, included |
| Fuel | Natural gas or liquid propane |
| Engine | Kohler Command Pro V-twin, 999cc |
| Monitoring | OnCue Plus |
| Motor-starting capacity | 39 kVA at 240 V |
| Warranty | 5-year limited |
| Dimensions | not stated |
| Weight | 670 lb |
How to Choose
Start with a load calculation. Add up the running watts of every circuit that must stay on, then add the starting watts of the motors in the mix: central air, well pump, and sump pump draw far more at startup than while running. Size on the natural-gas figure, the lower number for most units here.
Check what the bundle includes. Some listings sell the generator alone, while the five picks in this guide all include an automatic transfer switch. A 200-amp whole-house switch backs up the entire panel, while a 16-circuit switch backs up only the circuits the installer selects.
Pick the fuel by what the home already has. Natural gas runs off the utility line with no tank to refill, which suits long outages. Propane needs a tank and refills, but it works where no gas line reaches the home. Plan the install as part of the purchase: a concrete pad, a gas line, permits, and clearances from windows and doors. The battery is sold separately on some models, including the 18kW Generac here, so confirm it is on the order.
Who Should Skip It
Renters should skip standby generators entirely, since the unit is permanently wired into a home they do not own. Homes without a natural gas line or room for a propane tank have no fuel supply to feed one.
Anyone who only loses power for a few hours a year is better served by a portable generator with a manual transfer switch, which costs far less than a fixed install. The same applies to homes with very small loads: a single refrigerator and a few lights do not need a 10kW unit. Anyone unwilling to hire licensed installers and pull permits should also pass, since a standby generator is a permanent part of the home’s electrical and gas systems.
FAQ
How is a standby generator different from a portable generator?
A standby generator is fixed in place, wired into the main panel through an automatic transfer switch, and starts itself when utility power drops. It runs on natural gas or propane piped to the unit. A portable generator rolls out when needed, runs on gasoline or propane from a tank, and needs manual setup plus extension cords or a manual transfer switch.
Do I need a transfer switch, or can I plug a standby generator into a wall outlet?
A transfer switch is required. It isolates the home from the grid so generator power cannot flow back onto utility lines, which would endanger line workers restoring power. Never plug a generator into a wall outlet. All five picks in this guide include an automatic transfer switch.
How long can a standby generator run during an outage?
As long as the fuel supply lasts. A unit on natural gas runs off the utility line, while a unit on propane runs until the tank empties, so tank size decides runtime on propane. The engine still needs oil checks and scheduled maintenance during long runs, so follow the manual for service intervals.
Does a standby generator need a battery?
Most standby generators need a battery to crank the starter motor. Some bundles include it and some sell it separately: the 18kW Generac in this guide sells the battery separately, so confirm it is on the order before install day. Keep the battery charged, since a dead battery is the most common reason a standby unit fails to start.
Final Verdict
For whole-home backup, the Generac Guardian 22kW (7043) is the strongest pick, with the output and the 200-amp switch to carry central air plus everyday circuits. The Generac 18kW (7324) and Kohler 14kW (14RCAL-200SELS) cover mid-size homes. The Generac Guardian 10kW (7172) is the sensible pick for essentials-only backup in a smaller home, and the Kohler 26kW (26RCAL-200SELS) is reserved for large homes whose load calculation rules out the smaller sizes. Get that load calculation from the installer before ordering.
Read next
- Best Generator Interlock Kits for Safe Home Backup 2026
- Best Generator Transfer Switch Kits for Home Backup
- Best Portable Generators for Home Backup: 5 Top Picks
- Best Sliding Door Locks for Patio Doors and Homes 2026
- Best Sump Pumps That Keep Your Basement Dry in 2026
- Best Gravity Water Filters for Home Emergencies 2026